Alle Produkte ansehen

Schnellsuche

Ultraform Acetal (POM) Copolymer

Lieferant: 
BASF Corporation
Markens: 
Ultraform
Polymer: 
Acetal (POM) Copolymer
Länder: 
Bosnia And Herzegovina, Croatia, Ireland, Italy, Macedonia, Montenegro, Portugal, Serbia, Spain, Turkey, United Kingdom

Ultraform на BASF е кополимерен POM с отлични фрикционни характеристики при плъзгане.

Те включват гъвкави инженерни пластмаси, имащи широк обхват свойства, предназначени за използване в сложни компоненти, които могат да издържат на високи натоварвания.
 

Приложения:

 

  • Автомобилно производство
  • Домакински приложения
  • Промишлени приложения; строителство на машини и съоръжения
  • Медицински технологии; вентили, пружини, зъбни предавки

 

Свойства:

 

  • Висока твърдост и здравина
  • Добри еластични свойства
  • Отлична устойчивост на химикали
  • Стабилност на размерите
  • Ниска степен на абсорбиране на вода
  • Ниска склонност към напукване
  • Отлични фрикционни свойства при плъзгане
Grades: 
H 2320 004
High-molecular-weight grade for extrusion of small thin-walled pipes and panels.
H 2320 006
High-molecular-weight grade with somewhat increased flowability for injection molding of relatively thick-walled moldings.
H 4320
High-molecular-weight grade for extrusion of semifinished product; particularly thick-walled products can be extruded at high output rates; high thermal stability and low discoloration
N 2200 G43
Injection-molding grade for parts requiring high stiffness and strength together with good mold release.
N 2200 G53
Injection-molding grade for parts requiring high stiffness and strength together with good mold release.
N 2310 P
Standard injection-molding grade with special lubricant. Extremely low coefficient of friction and extremely low wear sliding friction, with smooth metal surfaces (low roughness).
N 2320 003
Rapidly solidifying standard grade for injection molding.
N 2320 0035
Rapidly solidifying standard grade with improved impact strength for injection molding.
N 2320 0035 LEV
Rapidly solidifying grade of middle flowability for injection molding, with reduced emission potential.
N 2320 FC Aqua UN
Rapidly solidifying standard grade for injection molding.
N 2320 U035
UV-stabilized injection-molding grade.
N 2520 L
Product having reduced electric surface resistance.
N 2640 E2
Elastomer-modified injection-molding grade with enhanced toughness and high weld line strength.
N 2640 E4
Elastomer-modified injection-molding grade with high toughness and high weld line strength.
N 2650 Z2
Elastomer-modified injection-molding grades with high impact strength and reduced emission potential for clips, snap and fastening elements, also for components subject to impact stress.
N 2650 Z4
Elastomer-modified injection-molding grades with high impact strength and reduced emission potential for clips, snap and fastening elements, also for components subject to impact stress.
N 2650 Z6
Elastomer-modified injection-molding grade for applications with the highest demands on emissions and toughness at low stiffness.
N 2720 M210
Product with increased stiffness and strength as well as good wear characteristics, used, for instance, for sliding chains and conveyor systems.
N 2720 M63
Mineral-reinforced material for low-warpage moldings with high stiffness, strength and hardness.
N 2770 K
Injection-molding grade with improved wear characteristics for sliding elements.
S 1320 0021
Free-flowing and rapidly solidifying grade with enhanced stiffness and dimensional stability under heat. Highly stabilized against aggressive fuels and hot diesel oil.
S 1320 003
Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thicknesses, higher stiffness and thermal stability.
S 2320 003
Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thicknesses.
S 2320 003 PRO
Rapidly solidifying grade for injection molding for demanding mechanical requirements.
S 2320 0035
Free-flowing and rapidly solidifying standard grade with improved impact strength for injection molding.
S 2320 0035 LEV
Free-flowing and rapidly solidifying standard grade with reduced emission potential for injection molding.
S 2320 FC Aqua UN
Free-flowing, rapidly solidifying grade for moldings difficult to produce by injection molding and having low wall thicknesses.
W 2320 003
Very free-flowing, rapidly solidifying grade for use where processing is demanding but mechanical requirements are lower.
W 2320 003 PRO
Very free-flowing, rapidly solidifying grade for use where processing is extremely difficult but mechanical requirements are lower.
W 2320 0035
Very free-flowing and rapidly solidifying grade for high processing demands.
W 2320 0035 LEV
Very free-flowing, rapidly solidifying grade for injection molding, with reduced emission potential.
Z 2320 003
Rapidly solidifying grade for applications where processing is extremely difficult.
Z 2320 0035
Rapidly solidifying grade for applications with exceptional demands on flowability.