Alle Produkte ansehen

Schnellsuche

Ultramid Nylon 6

Lieferant: 
BASF Corporation
Markens: 
Ultramid
Polymer: 
Nylon 6
Länder: 
Belgium, Bosnia And Herzegovina, Croatia, France, Hungary, Ireland, Italy, Macedonia, Montenegro, Netherlands, Portugal, Serbia, Spain, Turkey, United Kingdom

Ultramid® на BASF са формовъчни смеси на база PA6, PA66 и различни кополиамиди, като PA66 / 6. Гамата включва също PA610 и частично ароматни полиамиди, като PA6T / 6. Формовъчните смеси се предлагат неармирани, армирани със стъклени нишки или минерали, както и армирани с дълги стъклени нишки за специални приложения. Ultramid® е забележителен със своята висока механична якост, здравина и термична стабилност. Освен това, Ultramid® предлага добра здравина при ниски температури, благоприятно фрикционно поведение при плъзгане и могат да бъдат обработвани без проблеми. Притежавайки отлични свойства, този материал Благодарение на отличните си свойства, този материал е станал необходим в почти всички инженерни сектори за широк спектър от различни компоненти и машинни елементи, като висококачествен електроизолационен материал и за много специални приложения.

Grades: 
B24 N 03
Ultramid® B24 N 03 is a light stabilized polyamide 6 for the production of bright textile fibers. The polymer is especially suitable for high speed spinning.
B24 NE 01
Ultramid® B24 NE 01 is a polyamide 6 for compounding.
B24 NSD 05
Ultramid® B24 NSD 05 is a light stabilized polyamide 6 for the production of semi dull textile fibers. The polymer is especially suitable for high speed spinning.
B27 03
Ultramid® B27 03 is a polyamide 6 for the production of bright textile and carpet fibers.
B27 E
Ultramid® B27 E is a polyamide 6 grade of low viscosity that is well suited for compounding and the production of monofilaments.
B27 SD 02
Ultramid® B27 SD 02 is a polyamide 6 for the production of semi dull textile and carpet fibers.
B27 SD 05
Ultramid® B27 SD 05 is a polyamide 6 for the production of semi dull textile and carpet fibers.
B33 L
Ultramid® B33 L is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.
B33 L 01
Ultramid® B33 L 01 is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.
B35EG3
Glass fibre reinforced injection moulding grade e.g. for internal gas pressure applications such as steering column switch, automobile mirror housings and wheels of mountain bikes.
B36 LN
Ultramid® B36 LN is a polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.
B3EG10
Glass fibre reinforced injection moulding grade forindustrial articles having very high rigidity
B3EG3
Glass fibre reinforced injection moulding grade for housings (e.g: automotive mirror housings). Also used for wheels of mountain bikes.
B3EG5
Glass fibre reinforced injection moulding grade for industrial articles and electrical insulating parts.
B3EG6
A glass fibre reinforced injection moulding grade for industrial articles and electrical insulating parts.
B3EG7
Glass fibre reinforced injection moulding grade for industrial articles and electrical insulating parts.
B3G10 SI BK23322
Glass fibre-reinforced injection moulding grade, with excellent surface quality especially suitable for the production of visible parts with very high stiffness. Optimum surface quality is generally obtained at a very high injection speed.
B3G8
A glass fibre reinforced injection moulding grade suitable for auto pedals and modules.
B3GK24
A combined glass-fibre and glass-bead reinforced injection moulding grade for industrial articles having very high dimensional stability, used e.g. for automobile ashtrays and housings for electronics.
B3GM35 BK30564
A glass-fibre and mineral reinforced injection moulding grade for industrial articles having medium rigidity and high dimensional stability, used e.g. for engine covers, handles, mountings, etc.
B3K
An easy flowing, stabilized injection moulding grade for fast processing. Uses include technical parts with wall thicknesses > 2 mm (eg machinery components, fans, housings of hand-held power tools).
B3L
An impact-modified, easy flowing injection moulding grade for fast processing. Uses include impact-resistant articles (eg dowels, housings, fittings, small parts and anchors).
B3M6
A mineral-filled injection molding grade for high impact industrial items requiring very high dimensional stability, such as automobile wheel covers.
B3S
An easy flowing, finely crystalline injection moulding grade for very fast processing. Parts produced include thin-walled technical parts (eg housing, fittings, grips, small parts and fixing clamps).
B3UG4
An halogen-free flameretardant injection molding grade with outstanding free-flow properties, with good electrical properties and low smoke density; resistant to glow wire test GWFI to 960 °C.
B3WG10 BK00564
Glass fibre reinforced and heat ageing resistance injection moulding grade for industrial parts requiring very high rigidity.
B3WG3
Injection moulding grade, glass fibre-reinforced, heat stabilized, easy flowing, technical moulded parts with high rigidity and dimensional stability for use in construction of vehicles, electrical engineering, machine construction, building trade and in the field of leisure time articles Application: door handles, control elements, housing for relays, fans, radiator grill
B3WG5
Glass fibre reinforced and heat ageing resistance injection moulding grade, for fan wheels.
B3WG6
Glass fibre reinforced and heat ageing resistant injection moulding grade used e.g. for automobile manifolds
B3WG6 GP BK23210
Glass fibre reinforced and heat ageing resistant injection moulding grade, with enhanced flowability used e.g. for automobile manifolds
B3WG7
Glass fibre reinforced and heat ageing resistance injection moulding grade, used e.g. for automobile manifols and pedals.
B3WGM24 HP BK23210
Glass-fibre and mineral reinforced injection moulding grade with outstanding flowability for industrial articles having medium to high rigidity, used e.g. for automobile engine covers, housings, etc.
B3WGM24 sw23228
Glass-fibre and mineral reinforced heat stabilised injection moulding grade for industrial parts having medium to high rigidity and high dimensional stability, used e.g. for automobile engine covers, housings and automotive door handles.
B3ZG3
An impact-modified, glass fibre reinforced injection molding grade, used e.g. for automobile cable conduits
B3ZG6
An impact-modified, glass fibre reinforced injection molding grade for industrial items requiring very high impact stregth and rigidity, used e.g. for automobile airbag housings and half-shells for suitcases.
B3ZG8 BK20560
Impact-modified, glass fiber reinforced injection molding grade for industrial items having very high impact strength and rigidity, used e.g. for automobile airbag housings and half-shells for suitcases.
B40
Ultramid® B40 is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.
B40 L
Ultramid® B40 L is a lubricated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.
B40 LN
Ultramid® B40 LN is a polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film. Clarity and thermoformability are enhanced by the incorporation of nucleating and slip agent.